Surface Treatments – Part II
In this post, we went to the second part of improving acoustic levels for designing a home theater, and with an example, we examined its coefficients.
amplifier
Surface Treatments – Part I
In this post, we went to the first part of improving the acoustic levels for designing a home theater, and we will review the second part in future posts.
Loudspeaker Arrangement
A 3/4 surround sound setup was aligned according to the ITU-R BS.775-3 recommendations for a seven-channel arrangement. All loudspeakers are at least one meter far from any adjacent room boundary to avoid loudspeaker-room interactions since the loudspeakers used in this example The front soundstage comprises a center channel and two loudspeakers aligned at ± 30° …
Room Mode Calculation
In this post, we went on to calculate the room modes for designing a home theater and examined the second part of the requirements for implementation.
Home Theater Design
In this post, we went to an example of designing a home theater and examined the first part of the requirements for implementation.
Features of “Room Optimizer”
Computerized room optimization in home theaters is currently implemented in state-of-the-art surround sound processors. A practical example for computerized loudspeaker and listener positioning can be given by the software program “Room Optimizer” which was developed in 1997. This program allows computing the optimum locations for loudspeakers and listeners within a certain area which can be …
Optimum Viewing Angles and Distances and Listening Position
In this post, we went to the recommendations for optimizing viewing angles, distances and listening locations, and examined its considerations, benefits and advantages.
Optimum Room Dimensions and Reverberation Time
In this post, we went to the recommendations for optimizing the dimensions of the room and the reverberation time, and examined its considerations, benefits and advantages.
ITU-R BS.775-3 Surround Sound Recommendations
The International Telecommunication Union’s radio communications division recommended ITU-R BS.775-3 for a multi-channel stereo audio system with or without video. Which was updated in 2012. And will be discussed in excerpts, the main points of which we mentioned in the previous post. 3/2 loudspeaker Figure 1. depicts the ITU recommendations for a 3/2 loudspeaker arrangement …
Channel Numbering in Sound Reproduction
In this post, we review the categories of surround channels in audio reproduction and introduce the relevant recommendations by ITU-R BS.775-3.
